Engineered for superior sealing performance, this Viton O-ring in a carbon steel housing offers exceptional resistance to extreme temperatures and aggressive chemicals, ensuring reliable operation in harsh industrial environments.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 1.639" |
| Outside Diameter | 5.265" |
| Cross Section | 0.158" |
Built to exacting engineering tolerances, this industrial O-ring features an Inside Diameter (ID) of 1.639 inches, an Outside Diameter (OD) of 5.265 inches, and a Cross Section (CS) of 0.158 inches. The Viton elastomer provides outstanding resistance to a broad spectrum of chemicals, fuels, oils, and solvents, along with excellent thermal stability, operating effectively across a wide temperature range. The robust carbon steel housing ensures mechanical integrity and pressure containment in demanding applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean, dry, and free of debris. 2. Carefully install the O-ring into its designated groove, avoiding any stretching or twisting. 3. Apply a light coating of compatible lubricant if recommended for the specific application to facilitate assembly and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Gently seat the O-ring, allowing it to conform to the groove without excessive elongation. Use appropriate tools if necessary. |
| Using an incompatible lubricant, which can degrade the Viton. | Consult the O-ring manufacturer's specifications or chemical compatibility charts for approved lubricants. |
A: This Industrial O-Ring, Viton is manufactured from Carbon Steel.
A: Hydraulic and pneumatic systems, Chemical processing equipment, Automotive fuel systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||