Engineered for demanding environments, this Viton O-ring with a robust carbon steel core offers exceptional sealing performance. It withstands extreme temperatures and aggressive chemicals, ensuring reliability in critical applications.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 4.356" |
| Outside Diameter | 8.946" |
| Cross Section | 0.132" |
A high-performance industrial component, this Viton O-ring is constructed with a superior fluoroelastomer (FKM) sealing element bonded to a hardened carbon steel core. The precisely machined dimensions – an inside diameter of 4.356 inches, an outside diameter of 8.946 inches, and a cross-section of 0.132 inches – guarantee a precise fit and leak-proof seal. Viton's inherent resistance to high temperatures (up to 400°F / 200°C) and a wide range of chemicals, fuels, and oils makes this O-ring suitable for applications in aerospace, automotive, and chemical processing industries where performance and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating grooves are clean, free of debris, and properly lubricated. 2. Carefully stretch the O-ring over the male component or into the female groove, avoiding excessive force or sharp tools. 3. Verify proper seating and compression of the O-ring before assembly completion.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening during assembly, which can lead to extrusion or premature failure. | Adhere to specified torque values and avoid excessive clamping force. |
| Using incompatible lubricants that can degrade the Viton material. | Consult compatibility charts and use only Viton-approved lubricants. |
A: This Industrial O-Ring, Viton is manufactured from Carbon Steel.
A: High-temperature hydraulic systems, Fuel and oil resistant seals, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||