This industrial Viton O-ring, housed in a robust carbon steel casing, delivers exceptional sealing performance. Its precise dimensions ensure a reliable seal in high-pressure and extreme temperature applications.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 0.393" |
| Outside Diameter | 9.730" |
| Cross Section | 0.121" |
Built to exacting engineering tolerances, this Viton O-ring features an inside diameter of 0.393 inches, an outside diameter of 9.730 inches, and a cross-section of 0.121 inches. The Viton material offers superior resistance to a wide range of chemicals, oils, fuels, and extreme temperatures (-40°F to +400°F). The carbon steel housing provides structural integrity and enhanced resistance to mechanical stress and external forces, making it ideal for heavy-duty industrial environments where standard elastomeric O-rings may fail.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean, dry, and free from debris or damage. 2. Carefully place the O-ring into its designated groove, avoiding stretching or twisting. 3. Verify the O-ring is properly seated and that no portion is pinched or protruding before assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Gently flex the O-ring into the groove, using a non-marring tool if necessary, to avoid compromising its sealing integrity. |
| Installing on a dirty or damaged groove. | Thoroughly clean and inspect the groove for any imperfections that could lead to leaks or O-ring damage. |
A: This Industrial O-Ring, Viton is manufactured from Carbon Steel.
A: Hydraulic systems, Pneumatic systems, Chemical processing equipment, Automotive fuel systems, High-temperature fluid handling.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||