This industrial Viton O-ring, featuring a brass composition, delivers exceptional sealing integrity in high-pressure and corrosive environments. Engineered for durability, it ensures reliable performance in critical applications.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 9.435" |
| Outside Diameter | 1.194" |
| Cross Section | 0.217" |
Engineered for reliability and performance, this industrial O-ring is constructed from premium Viton, renowned for its superior resistance to heat, chemicals, and oils. The precision brass housing provides structural integrity and environmental protection. With an Inside Diameter of 9.435 inches, an Outside Diameter of 1.194 inches, and a Cross Section of 0.217 inches, this O-ring is designed to meet stringent sealing requirements in demanding industrial settings, ensuring a leak-proof seal under extreme operating conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, dry, and free from debris. 2. Carefully stretch the O-ring over the component, avoiding excessive force or sharp tools. 3. Gently seat the O-ring into its designated groove, confirming it is fully contained and not twisted.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a sharp object to install the O-ring, causing nicks or cuts. | Employ a soft, non-metallic installation tool or gently stretch the O-ring by hand. |
| Installing a twisted or deformed O-ring, leading to leaks. | Visually inspect the O-ring for any twists or deformation before and during installation, ensuring it sits flat in the groove. |
A: This Industrial O-Ring, Viton is manufactured from Brass.
A: Hydraulic systems, Chemical processing equipment, Automotive fuel systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||