This industrial O-ring features a Viton sealing element within a robust brass housing. Engineered for superior chemical and temperature resistance, it provides reliable, leak-free performance in critical industrial systems.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 9.302" |
| Outside Diameter | 6.012" |
| Cross Section | 0.164" |
Precision-manufactured to tight tolerances, this Viton O-ring offers exceptional sealing integrity. The internal Viton material provides excellent resistance to aggressive chemicals, high temperatures (up to 450°F/232°C), and harsh environments. The overall dimensions, with an Inside Diameter of 9.302 inches, an Outside Diameter of 6.012 inches, and a Cross Section of 0.164 inches, are critical for ensuring a precise fit and optimal compression within mating grooves. The brass housing enhances structural support and compatibility with certain fluid systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, dry, and free from burrs or damage. 2. Carefully install the O-ring, avoiding stretching or twisting. 3. Apply a thin layer of compatible lubricant if recommended for the specific application to facilitate installation and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation, leading to premature failure and leakage. | Install the O-ring without excessive tension, ensuring it seats fully within the groove without distortion. |
| Using incorrect lubrication, which can degrade the Viton material or contaminate the system. | Consult the O-ring manufacturer's recommendations or the system specifications for approved lubricants compatible with Viton and the operating environment. |
A: This Industrial O-Ring, Viton is manufactured from Brass.
A: Chemical Processing Equipment, High-Temperature Fluid Systems, Automotive and Aerospace Sealing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||