This industrial O-ring, crafted from high-performance Viton and featuring a brass construction, provides superior sealing integrity. Engineered for demanding applications, it offers exceptional resistance to heat, chemicals, and pressure.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 1.361" |
| Outside Diameter | 8.588" |
| Cross Section | 0.142" |
Built to exacting engineering tolerances, this Viton O-ring boasts an Inside Diameter of 1.361 inches, an Outside Diameter of 8.588 inches, and a Cross Section of 0.142 inches. The Viton material ensures excellent chemical resistance, thermal stability up to 400°F (204°C), and low compression set, making it ideal for aggressive fluid environments and high-temperature sealing applications. The brass component provides inherent corrosion resistance and specific mechanical properties suitable for certain mounting or conductive requirements in industrial systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, free of debris, and properly dimensioned. 2. Lightly lubricate the O-ring and groove with a compatible lubricant to prevent tearing during installation. 3. Carefully install the O-ring into the groove, avoiding overstretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Installing on a dirty or damaged surface. | Thoroughly clean and inspect the sealing surface and groove before installation. |
| Using excessive force or stretching the O-ring during installation. | Apply gentle pressure and avoid unnecessary stretching; use appropriate tools if needed. |
A: This Industrial O-Ring, Viton is manufactured from Brass.
A: Chemical Processing Equipment, High-Temperature Hydraulic Systems, Automotive Fuel Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||