Engineered from high-performance Viton and featuring brass construction, this industrial O-ring provides exceptional sealing integrity in challenging operational environments. Designed for superior chemical and temperature resistance.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 9.487" |
| Outside Diameter | 1.330" |
| Cross Section | 0.159" |
Purpose-built for heavy-duty applications, this industrial Viton O-ring is meticulously crafted with an inside diameter of 9.487 inches, an outside diameter of 1.330 inches, and a 0.159-inch cross-section. The Viton material offers outstanding resistance to a wide spectrum of chemicals, including aggressive acids, fuels, and oils, while maintaining its sealing properties across a broad temperature range. The brass construction ensures compatibility in specific corrosive or conductive environments where copper alloys are preferred. This combination makes it ideal for demanding hydraulic systems, automotive fuel lines, and chemical processing equipment where reliability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove and O-ring are clean and free of debris. 2. Carefully install the O-ring into the groove, avoiding any stretching or twisting. 3. Verify proper seating and compression of the O-ring before assembling mating components.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-stretching the O-ring during installation. | Gently roll or guide the O-ring into the groove to prevent excessive elongation, which can lead to premature failure. |
| Installing on a dirty or damaged surface. | Thoroughly clean the groove and mating surfaces. Inspect for any nicks, burrs, or corrosion that could compromise the seal. |
A: This Industrial O-Ring, Viton is manufactured from Brass.
A: Hydraulic and pneumatic systems, Chemical processing equipment, Automotive fuel and oil systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||