This high-performance industrial O-ring, manufactured from premium Viton, offers superior resistance to extreme temperatures, chemicals, and aggressive media. Engineered for reliability in critical sealing applications.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 3.043" |
| Outside Diameter | 9.822" |
| Cross Section | 0.149" |
Purpose-built for heavy-duty applications, this Viton O-ring provides exceptional sealing integrity under demanding operational conditions. Its precise dimensions – 3.043" inside diameter, 9.822" outside diameter, and a 0.149" cross-section – ensure a perfect fit within its designated groove. Viton's inherent chemical inertness and broad temperature range (typically -20°C to +200°C, with excursions higher) make it the material of choice for hydraulic systems, fuel lines, and process equipment exposed to fuels, oils, solvents, and strong acids. This O-ring guarantees long-term performance and leak prevention in environments where lesser materials would fail.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, free of debris, and properly lubricated with a compatible lubricant. 2. Carefully stretch the O-ring over the shaft or into the groove, avoiding excessive force or the use of sharp tools. 3. Verify the O-ring is seated evenly and without twists or damage before assembling mating components.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to nicks or tears in the O-ring. | Employ proper stretching techniques and use a lubricant to ease installation. If tools are necessary, opt for plastic or nylon installation aids. |
| Installing a twisted or kinked O-ring, compromising the seal. | Always ensure the O-ring is laid flat and evenly within the groove, paying close attention to its orientation before assembly. |
A: This Industrial O-Ring, Viton is manufactured from Nylon.
A: Hydraulic Systems, Fuel and Oil Systems, Chemical Processing Equipment, Automotive Applications, Aerospace Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||