This high-performance Viton O-ring, featuring a brass construction, provides superior sealing in challenging industrial environments. Engineered for reliability and longevity, it ensures integrity under extreme conditions.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 2.352" |
| Outside Diameter | 5.770" |
| Cross Section | 0.181" |
A proven choice for industrial professionals, this Viton O-ring offers exceptional chemical and temperature resistance, making it ideal for aggressive media and high-heat applications. The robust brass construction enhances its durability and compatibility in corrosive settings. With an inside diameter of 2.352 inches, an outside diameter of 5.770 inches, and a precise 0.181-inch cross-section, this seal guarantees a tight, leak-proof fit in critical hydraulic, pneumatic, and fluid handling systems where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean mating surfaces thoroughly to remove any debris or old sealant. 2. Carefully lubricate the O-ring with a compatible lubricant (e.g., silicone grease or a specialized O-ring lubricant). 3. Gently stretch and install the O-ring into its designated groove, ensuring it is seated evenly without twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong lubricant, which can degrade the Viton material. | Always consult the O-ring manufacturer's recommendations for compatible lubricants. |
| Forcing the O-ring into the groove, leading to nicks or cuts. | Apply light pressure and ensure the O-ring is properly aligned before seating. |
A: This Industrial O-Ring, Viton is manufactured from Brass.
A: Hydraulic Systems, Chemical Processing Equipment, Automotive Fuel Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||