This industrial O-ring, crafted from robust Viton, offers superior sealing performance in challenging environments. Its precise dimensions ensure a reliable fit and long-lasting integrity in critical applications.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 5.003" |
| Outside Diameter | 5.668" |
| Cross Section | 0.147" |
A proven choice for industrial professionals, this Viton O-ring is engineered for exceptional durability and chemical resistance. With an inside diameter of 5.003 inches, an outside diameter of 5.668 inches, and a precise 0.147-inch cross-section, it provides a secure seal against aggressive media and extreme temperatures. Viton's inherent properties make it ideal for applications requiring resistance to fuels, oils, solvents, and high heat, ensuring operational reliability and extended service life in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, dry, and free of debris. 2. Lightly lubricate the O-ring and groove with a compatible lubricant if recommended for the application. 3. Carefully install the O-ring into the groove, avoiding any stretching or twisting beyond its natural state.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply steady, even pressure and avoid stretching or rolling the O-ring into place. Utilize appropriate tools if necessary. |
| Installing on a contaminated or damaged sealing surface. | Thoroughly inspect and clean the sealing groove and mating surfaces before O-ring installation to prevent leaks and premature failure. |
A: This Industrial O-Ring, Viton is manufactured from Nylon.
A: Hydraulic and Pneumatic Systems, Chemical Processing Equipment, Automotive Fuel Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||