This high-performance industrial O-ring is constructed from premium Viton, ensuring exceptional resistance to aggressive chemicals, high temperatures, and extreme pressures. Engineered for reliability in critical sealing systems.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 6.540" |
| Outside Diameter | 4.431" |
| Cross Section | 0.136" |
Manufactured under strict quality controls, this Viton O-ring boasts a precise Inside Diameter of 6.540 inches, an Outside Diameter of 4.431 inches, and a Cross Section of 0.136 inches. Viton's inherent properties include excellent resistance to a wide range of chemicals, fuels, oils, and solvents, as well as superior thermal stability up to 400°F (204°C). Its low compression set ensures long-lasting sealing integrity in demanding industrial environments where chemical inertness and temperature extremes are primary concerns.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, dry, and free from debris or damage. 2. Carefully lubricate the O-ring with a compatible lubricant, such as silicone grease or a light mineral oil. 3. Gently install the O-ring into the groove, avoiding any stretching or twisting, ensuring it seats evenly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-stretching the O-ring during installation. | Avoid stretching the O-ring more than 1-2% of its circumference. Install it without excessive tension. |
| Using incompatible lubricants or cleaning agents. | Always consult material compatibility charts to ensure lubricants and cleaning agents are suitable for Viton and the application's media. |
| Installing into a damaged or dirty groove. | Thoroughly inspect and clean the sealing groove before installation to prevent leaks and premature failure. |
A: This Industrial O-Ring, Viton is manufactured from Polycarbonate.
A: Automotive fuel systems, Chemical processing equipment, Aerospace hydraulic systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||