This industrial O-ring, manufactured from robust Aluminum 6061, offers exceptional sealing capabilities. Engineered for reliability, it ensures leak-proof performance in critical applications.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 9.136" |
| Outside Diameter | 3.223" |
| Cross Section | 0.114" |
A proven choice for industrial professionals, this Viton O-ring exhibits precise dimensions with an Inside Diameter of 9.136 inches, an Outside Diameter of 3.223 inches, and a 0.114-inch cross-section. Constructed from Aluminum 6061, it provides excellent resistance to a broad spectrum of chemicals, including fuels, oils, and many acids, as well as exhibiting a wide operating temperature range. Its inherent durability makes it ideal for use in hydraulic systems, pneumatic equipment, automotive applications, and general industrial fluid sealing where integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean both sealing surfaces and the O-ring thoroughly to remove any debris or contaminants. 2. Carefully lubricate the O-ring with a compatible lubricant to prevent pinching and ensure smooth installation. 3. Gently insert the O-ring into its designated groove, ensuring it is seated evenly without twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong lubricant, which can degrade the O-ring material. | Always consult the material compatibility chart for the specific lubricant recommended for Viton O-rings and Aluminum 6061. |
| Forcing the O-ring into the groove, leading to tears or cuts. | Apply gentle, even pressure and consider using installation tools if necessary to avoid damaging the O-ring during placement. |
A: This Industrial O-Ring, Viton is manufactured from Aluminum 6061.
A: Hydraulic and Pneumatic Systems, Automotive Fuel Systems, Chemical Processing Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||