Engineered for extreme environments, this industrial O-ring features a robust Viton elastomer bonded to an Aluminum 6061 core. It delivers superior resistance to chemicals and high temperatures, ensuring reliable sealing in critical applications.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 6.695" |
| Outside Diameter | 2.777" |
| Cross Section | 0.202" |
Manufactured under strict quality controls, this industrial O-ring boasts an Inside Diameter of 6.695 inches, an Outside Diameter of 2.777 inches, and a Cross Section of 0.202 inches. The Viton material provides exceptional resistance to a wide range of aggressive chemicals, oils, fuels, and solvents, while maintaining its sealing integrity across a broad temperature spectrum. The embedded Aluminum 6061 core offers enhanced structural support, dimensional stability, and improved conductivity where required, making it ideal for high-pressure and demanding industrial sealing solutions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, dry, and free of debris. 2. Carefully lubricate the O-ring and the groove with a compatible lubricant. 3. Gently install the O-ring into the groove, avoiding any twisting or stretching.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply lubricant and install with moderate, controlled pressure, ensuring the O-ring seats properly without deformation. |
| Selecting an incompatible lubricant or chemical agent. | Always verify lubricant and chemical compatibility with both Viton and Aluminum 6061 to prevent material degradation. |
A: This Industrial O-Ring, Viton is manufactured from Aluminum 6061.
A: Chemical processing equipment, Automotive fuel systems, Aerospace hydraulic systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||