This industrial O-ring, constructed from premium Viton, provides exceptional sealing in challenging environments. Its robust design ensures long-term reliability and resistance to extreme temperatures and aggressive chemicals.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 1.548" |
| Outside Diameter | 10.716" |
| Cross Section | 0.200" |
Engineered for reliability and performance, this Viton industrial O-ring features precise dimensions: an Inside Diameter (ID) of 1.548 inches, an Outside Diameter (OD) of 10.716 inches, and a Cross Section (CS) of 0.200 inches. Viton's inherent properties of excellent resistance to heat, chemicals, oils, and weathering make this seal ideal for applications where standard elastomers would fail. Its high tensile strength and low compression set guarantee a persistent and effective seal under demanding operational conditions, including in the automotive, aerospace, and chemical processing industries.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean and free of debris or damage. 2. Lightly lubricate the O-ring with a compatible lubricant if recommended for the application. 3. Carefully install the O-ring into the groove, avoiding any twisting or stretching beyond its elastic limit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong lubricant, which can degrade Viton. | Consult the O-ring manufacturer's recommendations or use a lubricant specifically approved for Viton seals. |
| Over-stretching or twisting the O-ring during installation. | Install the O-ring carefully, ensuring it seats properly in the groove without excessive tension or deformation. |
A: This Industrial O-Ring, Viton is manufactured from Polycarbonate.
A: Automotive fuel systems, Aerospace hydraulic systems, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||