Engineered for extreme environments, this Viton O-ring, crafted from robust Aluminum 6061, offers superior chemical and thermal resistance. Its precise dimensions ensure reliable sealing in critical industrial applications.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 8.966" |
| Outside Diameter | 6.029" |
| Cross Section | 0.275" |
Manufactured under strict quality controls, this industrial O-ring features an 8.966-inch inside diameter, a 6.029-inch outside diameter, and a 0.275-inch cross-section. Constructed from high-grade Aluminum 6061, it provides excellent resistance to a wide range of chemicals, oils, and extreme temperatures (-20°F to +400°F). The material's inherent strength and low friction coefficient make it suitable for high-pressure dynamic and static sealing applications in aerospace, automotive, and chemical processing industries.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, dry, and free of debris or sharp edges. 2. Carefully lubricate the O-ring with a compatible lubricant if recommended for the application. 3. Gently stretch and place the O-ring into the groove, avoiding excessive tension or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible lubricants that degrade the Viton material. | Always consult material compatibility charts for lubricants suitable for Viton and the specific operating environment. |
| Over-stretching or twisting the O-ring during installation, leading to premature failure. | Install the O-ring with minimal tension, ensuring it sits flat and uniformly within the groove. |
A: This Industrial O-Ring, Viton is manufactured from Aluminum 6061.
A: High-temperature hydraulic systems, Chemical processing equipment seals, Aerospace fuel and lubrication systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||