Engineered for demanding industrial environments, this Viton O-ring offers superior resistance to heat, chemicals, and aggressive fluids. Its robust construction ensures reliable sealing in critical applications.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 8.827" |
| Outside Diameter | 1.486" |
| Cross Section | 0.161" |
Manufactured under strict quality controls, this industrial O-ring features a precise Inside Diameter of 8.827 inches, an Outside Diameter of 1.486 inches, and a Cross Section of 0.161 inches. Constructed from high-performance Viton (FKM), it exhibits exceptional thermal stability, enduring temperatures from -20°F to +400°F (-29°C to +204°C). Its excellent chemical resistance makes it ideal for use with fuels, oils, lubricants, acids, and many solvents, ensuring long-term sealing integrity in challenging operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating grooves are clean, free of debris, and properly lubricated with a compatible lubricant. 2. Carefully stretch the O-ring over the smaller diameter component or into the groove, avoiding excessive force or sharp tools. 3. Gently compress the O-ring into the groove, ensuring it sits flush and is not twisted or pinched.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to cuts or permanent deformation of the O-ring. | Apply lubricant and gently stretch or compress the O-ring into place. Utilize specialized O-ring installation tools if necessary for complex assemblies. |
| Installing a twisted or pinched O-ring, which compromises the seal and leads to premature failure. | Visually inspect the O-ring before and during installation to ensure it lies flat and is not contorted within the groove. |
A: This Industrial O-Ring, Viton is manufactured from Nylon.
A: Automotive fuel systems, Aerospace hydraulic and fuel seals, Chemical processing equipment, High-temperature industrial machinery, Oil and gas exploration equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||