Engineered for demanding environments, this Viton O-ring, housed in a robust carbon steel casing, provides exceptional sealing integrity against aggressive chemicals and extreme temperatures.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 0.865" |
| Outside Diameter | 8.737" |
| Cross Section | 0.182" |
A high-performance industrial component, this Viton O-ring is specifically designed for critical sealing applications. Featuring an inside diameter of 0.865 inches, an outside diameter of 8.737 inches, and a cross-section of 0.182 inches, its Viton (Fluorocarbon) elastomer offers superior resistance to a wide range of chemicals, fuels, and high temperatures up to 400°F (204°C). The carbon steel housing provides structural support and enhanced durability in high-pressure systems. Ideal for aerospace, automotive, and chemical processing industries where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean and free from debris. 2. Carefully install the O-ring into the groove, avoiding any stretching or twisting. 3. Apply a compatible lubricant if necessary for easier installation and to prevent initial damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Gently place the O-ring into the groove, using minimal force and ensuring it sits flat. |
| Using the wrong lubricant, which can degrade Viton. | Consult the O-ring manufacturer's recommendations or use lubricants specifically rated for Viton compatibility. |
A: This Industrial O-Ring, Viton is manufactured from Carbon Steel.
A: High-temperature hydraulic systems, Chemical processing equipment, Fuel and oil seals in automotive and aerospace.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||