This industrial-grade O-ring, constructed from premium Viton, offers exceptional resilience and sealing integrity. Precisely engineered for critical applications, it ensures reliable performance under extreme conditions.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 7.833" |
| Outside Diameter | 7.196" |
| Cross Section | 0.255" |
Designed for demanding industrial environments, this Viton O-ring boasts a nominal inside diameter of 7.833 inches and an outside diameter of 7.196 inches, with a precise cross-section of 0.255 inches. Viton's inherent properties, including superior resistance to high temperatures, aggressive chemicals, oils, and fuels, make this seal ideal for applications in the petrochemical, automotive, and aerospace industries where longevity and absolute sealing are paramount. Its robust construction ensures a tight, leak-proof seal even under significant pressure and thermal cycling.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, free of debris, and properly dimensioned according to specifications. 2. Lightly lubricate the O-ring with a compatible lubricant to prevent damage during installation. 3. Carefully install the O-ring into the groove, avoiding excessive stretching or twisting. Ensure it sits flush and uniformly within the groove.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Installing on a contaminated or damaged groove. | Thoroughly clean and inspect the groove for any nicks, burrs, or debris before installation. |
| Over-stretching or twisting the O-ring during installation. | Handle the O-ring with care and avoid unnecessary elongation; use a lubricant if needed to ease installation without distortion. |
A: This Industrial O-Ring, Viton is manufactured from Nylon.
A: Hydraulic and pneumatic systems, Chemical processing equipment, Automotive fuel systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||