This Viton industrial O-ring offers superior sealing performance in aggressive environments. Engineered for reliability, it ensures leak-free operation in critical fluid and gas systems.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 7.704" |
| Outside Diameter | 0.753" |
| Cross Section | 0.078" |
Built to exacting engineering tolerances, this Viton O-ring features an Inside Diameter of 7.704 inches, an Outside Diameter of 0.753 inches, and a Cross Section of 0.078 inches. The Viton (FKM) material provides exceptional resistance to heat, chemicals, fuels, and oils, making it suitable for high-temperature and chemically demanding applications. Its robust composition ensures long service life and consistent sealing integrity under pressure and extreme conditions, meeting stringent industrial requirements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the groove is clean and free of debris. 2. Lubricate the O-ring lightly with a compatible lubricant. 3. Carefully install the O-ring into the groove, avoiding any stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-stretching the O-ring during installation. | Install the O-ring without excessive stretching to prevent premature failure and loss of sealing force. |
| Using incompatible lubricants. | Always use lubricants specifically approved for Viton (FKM) and the media being sealed. |
A: This Industrial O-Ring, Viton is manufactured from Polycarbonate.
A: Automotive fuel systems, Chemical processing equipment, High-temperature hydraulic systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||