This industrial-grade Viton O-ring provides exceptional sealing performance in aggressive chemical and high-temperature environments. Its robust material ensures long-term reliability and leak prevention.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 7.381" |
| Outside Diameter | 1.084" |
| Cross Section | 0.077" |
A high-performance industrial component, this Viton O-ring is engineered for critical sealing applications. Featuring an Inside Diameter of 7.381 inches, an Outside Diameter of 1.084 inches, and a Cross Section of 0.077 inches, it is constructed from premium Viton material. Viton offers outstanding resistance to a broad spectrum of chemicals, fuels, oils, and high temperatures, making it ideal for demanding operational conditions where traditional elastomers would degrade. Its resilience and low compression set guarantee sustained sealing integrity under pressure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean, dry, and free of any debris or sharp edges. 2. Carefully place the O-ring into its designated groove, avoiding stretching or twisting. 3. Apply a light, compatible lubricant if recommended for the specific application to aid installation and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Gently position the O-ring, allowing it to seat naturally in the groove without excessive tension. |
| Using incompatible lubricants or cleaning agents. | Always consult the O-ring manufacturer's compatibility chart for approved lubricants and cleaning solutions. |
| Installing on a damaged or dirty groove. | Thoroughly inspect and clean the groove for any burrs, nicks, or contaminants before installation. |
A: This Industrial O-Ring, Viton is manufactured from Nylon.
A: Chemical Processing Equipment, Automotive Fuel Systems, Aerospace Applications, High-Temperature Hydraulics.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||