This industrial O-ring features a robust Viton elastomer construction for exceptional resistance to harsh chemicals and extreme temperatures. Engineered for reliable sealing in critical systems.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 7.214" |
| Outside Diameter | 0.843" |
| Cross Section | 0.073" |
Purpose-built for heavy-duty applications, this Viton O-ring (Inside Diameter: 7.214", Outside Diameter: 0.843", Cross Section: 0.073") offers unparalleled performance in aggressive environments. The Viton (FKM) material provides excellent resistance to a wide range of chemicals, fuels, oils, and high temperatures (up to 204°C/400°F), making it ideal for demanding industrial fluid and gas sealing applications. Its precise dimensions ensure a tight, leak-proof seal in pumps, valves, hydraulic systems, and chemical processing equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, free of debris, and properly lubricated with a compatible lubricant. 2. Carefully place the O-ring into the groove, avoiding stretching beyond its elastic limit. 3. Gently compress the O-ring into the groove, ensuring it sits flush and uniformly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Stretch the O-ring only as much as necessary to fit it over the component, then gently guide it into the groove to minimize permanent deformation. |
| Installing on a dirty or damaged groove. | Thoroughly clean and inspect the groove for nicks, burrs, or corrosion before installation to prevent premature failure. |
A: This Industrial O-Ring, Viton is manufactured from Carbon Steel.
A: Chemical Processing Equipment, Hydraulic Systems, Automotive Fuel Systems, Aerospace Sealing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||