This industrial O-ring, crafted from high-performance Viton, offers superior sealing in aggressive environments. Its precise dimensions ensure a leak-proof fit for critical fluid and gas containment systems.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 7.205" |
| Outside Diameter | 2.308" |
| Cross Section | 0.254" |
Precision-manufactured to tight tolerances, this industrial O-ring features an Inside Diameter (ID) of 7.205 inches, an Outside Diameter (OD) of 2.308 inches, and a Cross Section (CS) of 0.254 inches. Constructed from Viton, a premium fluoroelastomer, it exhibits exceptional resistance to high temperatures (up to 400°F/204°C), a wide range of chemicals, fuels, oils, and solvents. This makes it ideal for use in demanding industrial settings requiring long-term reliability and sealing integrity under harsh operating conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free of debris. 2. Carefully position the O-ring within its designated groove, avoiding stretching or twisting. 3. Apply a thin, compatible lubricant if necessary to facilitate assembly and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening or stretching the O-ring during installation. | Install the O-ring gently, allowing it to seat naturally in the groove without excessive force. |
| Using incompatible lubricants or cleaning agents. | Always consult the material compatibility chart for Viton to ensure lubricants and cleaning agents do not degrade the elastomer. |
A: This Industrial O-Ring, Viton is manufactured from Nylon.
A: Chemical processing equipment, Automotive fuel systems, Aerospace hydraulic systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||