This industrial-grade Viton O-ring offers exceptional resistance to heat, chemicals, and harsh operating conditions. Engineered for reliable sealing in critical applications, its robust construction ensures longevity and performance.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 5.143" |
| Outside Diameter | 10.402" |
| Cross Section | 0.119" |
Designed for demanding industrial environments, this Viton O-ring boasts a precise Inside Diameter of 5.143 inches, an Outside Diameter of 10.402 inches, and a 0.119-inch cross-section. The fluoroelastomer (FKM) material provides superior resistance to a wide range of aggressive chemicals, fuels, oils, and extreme temperatures, typically ranging from -20°F to 400°F (-29°C to 204°C). This makes it an ideal choice for hydraulic systems, automotive applications, chemical processing, and aerospace where seal integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the groove is clean and free of debris. 2. Lubricate the O-ring lightly with a compatible lubricant. 3. Carefully install the O-ring into the groove, avoiding stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong lubricant, causing material degradation. | Consult the compatibility chart for lubricants suitable for Viton O-rings. |
| Overstretching the O-ring during installation, leading to premature failure. | Install the O-ring without excessive tension, allowing it to seat properly. |
A: This Industrial O-Ring, Viton is manufactured from Nylon.
A: Hydraulic Systems, Chemical Processing Equipment, Automotive Fuel Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||