Engineered for exceptional resilience, this industrial O-ring features a Viton elastomer for superior chemical and temperature resistance, reinforced with a Nylon sheath for enhanced durability in harsh operational settings.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 7.649" |
| Outside Diameter | 5.897" |
| Cross Section | 0.098" |
Designed for demanding industrial environments, this O-ring boasts an Inside Diameter of 7.649 inches, an Outside Diameter of 5.897 inches, and a precise 0.098-inch cross-section. Constructed with a premium Viton® fluoroelastomer core, it offers exceptional resistance to a wide array of aggressive chemicals, fuels, oils, and solvents, while maintaining integrity across a broad temperature range, from -20°F to +400°F (-29°C to +204°C). The integrated Nylon reinforcement provides enhanced dimensional stability, abrasion resistance, and extrusion resistance, making it ideal for high-pressure systems and dynamic sealing applications where traditional O-rings might fail.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Visually inspect the O-ring and groove for any damage, debris, or foreign material. Ensure the groove dimensions are within specified tolerances. 2. Apply a thin, uniform layer of compatible lubricant to the O-ring and the groove to facilitate installation and prevent damage during assembly. 3. Carefully install the O-ring into the groove, ensuring it is seated correctly and not twisted or over-stretched. Avoid using sharp tools that could puncture or nick the O-ring.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring stretching or tearing. | Apply appropriate lubrication and use gentle, even pressure. If resistance is met, re-inspect the groove and O-ring for obstructions or incorrect sizing. |
| Installing the O-ring without proper lubrication, causing friction damage. | Always use a compatible lubricant specifically recommended for the O-ring material and the application's media. |
| Allowing the O-ring to twist or become misaligned in the groove during installation. | Ensure the O-ring is seated evenly and fully within the groove before assembling mating parts. A twisted O-ring will compromise the seal. |
A: This Industrial O-Ring, Viton is manufactured from Nylon.
A: Hydraulic systems requiring high pressure and chemical resistance, Automotive fuel and oil handling systems, Chemical processing equipment and fluid transfer lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||