This industrial O-ring features a premium Viton elastomer for superior chemical and temperature resistance, housed within a robust 316 stainless steel casing. Engineered for critical sealing applications requiring exceptional durability and reliability.
| Standard | DIN 933 |
| Material | 316 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 6.803" |
| Outside Diameter | 8.977" |
| Cross Section | 0.217" |
Built to exacting engineering tolerances, this Viton O-ring boasts an inside diameter of 6.803 inches and an outside diameter of 8.977 inches, with a precise cross-section of 0.217 inches. The Viton material provides excellent resistance to a wide range of chemicals, oils, fuels, and high temperatures (up to 400°F/204°C), while the 316 stainless steel housing offers superior corrosion resistance and structural integrity. This combination ensures reliable sealing in harsh environments, preventing leaks and maintaining system performance under demanding operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free of debris. 2. Carefully position the O-ring within its groove, avoiding excessive stretching or twisting. 3. Apply a thin, compatible lubricant if necessary to facilitate installation and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, causing excessive compression and premature failure of the O-ring. | Adhere to specified torque values for all fasteners to ensure proper compression without damaging the seal. |
| Using incompatible lubricants or cleaning agents that degrade the Viton elastomer. | Consult chemical compatibility charts to select lubricants and cleaning agents specifically approved for Viton. |
A: This Industrial O-Ring, Viton is manufactured from 316 Stainless Steel.
A: Chemical Processing Equipment, Automotive Fuel Systems, Aerospace Hydraulic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||