This industrial O-ring, crafted from advanced Viton and featuring a robust Titanium Grade 5 core, provides exceptional sealing performance in demanding applications. Its precise dimensions ensure reliable, leak-proof operation under extreme conditions.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 3.243" |
| Outside Diameter | 6.042" |
| Cross Section | 0.114" |
Specified by design engineers worldwide, this Viton O-ring boasts an inside diameter of 3.243 inches, an outside diameter of 6.042 inches, and a cross-section of 0.114 inches. The inherent chemical inertness and high-temperature resistance of Viton, combined with the superior strength and corrosion resistance of Titanium Grade 5, make this seal ideal for critical applications in aerospace, chemical processing, and oil & gas, where reliability under severe operational parameters is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure sealing surfaces are clean, dry, and free from debris or damage. 2. Carefully place the O-ring into its designated groove, avoiding stretching or twisting. 3. Gently compress the O-ring during assembly, ensuring even contact around the entire circumference.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners during assembly, causing excessive compression and premature seal failure. | Adhere to specified torque values during assembly. Utilize a torque wrench for precise control. |
| Using incompatible cleaning agents that can degrade the Viton material. | Consult the material compatibility chart for approved cleaning solvents. Isopropanol or mild detergents are generally suitable. |
A: This Industrial O-Ring, Viton is manufactured from Titanium Grade 5.
A: High-temperature hydraulic systems, Chemical processing equipment, Aerospace fuel and hydraulic seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||