This industrial O-ring, constructed from premium Viton material, ensures exceptional sealing performance. Its robust design withstands extreme temperatures and aggressive chemicals, making it ideal for critical industrial applications.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 6.495" |
| Outside Diameter | 7.994" |
| Cross Section | 0.199" |
Built to exacting engineering tolerances, this Viton industrial O-ring features a precise inside diameter of 6.495 inches, an outside diameter of 7.994 inches, and a cross-section of 0.199 inches. The fluoroelastomer (FKM) composition of Viton provides outstanding resistance to a wide range of chemicals, fuels, oils, and solvents, as well as excellent thermal stability up to 400°F (204°C). This makes it the preferred choice for demanding environments in automotive, aerospace, chemical processing, and oil & gas industries where reliability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean the sealing groove and mating surfaces to remove any debris or contaminants. 2. Lightly lubricate the O-ring with a compatible lubricant, such as silicone grease or a fluorinated lubricant, to prevent tearing during installation. 3. Carefully insert the O-ring into the groove, ensuring it is seated evenly and without twisting. Avoid using sharp tools that could damage the O-ring.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, which can compress the O-ring beyond its elastic limit and cause permanent deformation or extrusion. | Adhere to specified torque values for all fasteners. Use a torque wrench to ensure consistent and accurate tightening. |
| Using incompatible lubricants that can degrade the Viton material over time, leading to premature seal failure. | Always use lubricants specifically recommended for Viton and the operating environment. Consult compatibility charts if unsure. |
A: This Industrial O-Ring, Viton is manufactured from Nylon.
A: High-temperature hydraulic systems, Chemical processing equipment, Automotive fuel systems, Aerospace seals, Oil and gas exploration equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||