This industrial O-ring features a durable Viton sealing element encapsulated within a robust 304 stainless steel housing. Engineered for extreme temperature and chemical resistance, it ensures reliable sealing in critical applications.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 8.412" |
| Outside Diameter | 4.896" |
| Cross Section | 0.216" |
Engineered for reliability and performance, this industrial O-ring boasts a precise Inside Diameter of 8.412 inches, an Outside Diameter of 4.896 inches, and a Cross Section of 0.216 inches. The Viton elastomer offers exceptional resistance to a wide range of aggressive chemicals, fuels, and high temperatures, while the 304 stainless steel housing provides superior structural integrity and corrosion resistance. This combination makes it ideal for demanding environments where conventional seals may fail, ensuring a leak-proof connection under duress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean both the groove and the O-ring mating surfaces to remove any debris or contaminants. 2. Carefully inspect the O-ring for any nicks, cuts, or imperfections prior to installation. 3. Gently install the O-ring into the designated groove, ensuring it sits evenly and without twisting or stretching.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Installing a dry O-ring, leading to increased friction and potential damage during installation. | Apply a thin layer of compatible lubricant to the O-ring and the groove before installation to reduce friction and prevent tearing. |
| Over-stretching or twisting the O-ring during installation, compromising its sealing capabilities. | Handle the O-ring with care, ensuring it is placed into the groove without excessive elongation or rotation. |
A: This Industrial O-Ring, Viton is manufactured from 304 Stainless Steel.
A: Chemical Processing Equipment, Automotive Fuel Systems, Aerospace Hydraulic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||