This industrial Viton O-ring, reinforced with a 304 stainless steel housing, provides superior sealing in extreme chemical and temperature conditions. Engineered for reliability and longevity.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 8.075" |
| Outside Diameter | 8.770" |
| Cross Section | 0.215" |
Specified by design engineers worldwide, this Viton O-ring features a precise 8.075" inside diameter, an 8.770" outside diameter, and a 0.215" cross-section. The Viton elastomer offers exceptional resistance to a wide range of chemicals, fuels, and high temperatures up to 400°F (204°C), while the 304 stainless steel housing ensures structural integrity and corrosion resistance in demanding industrial environments. This combination makes it ideal for applications in chemical processing, automotive, aerospace, and oil & gas industries where uncompromising sealing performance is critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating grooves are clean, free of debris, and properly lubricated with a compatible lubricant. 2. Carefully stretch the O-ring over the component, avoiding excessive force or sharp tools that could nick or cut the sealing surface. 3. Gently seat the O-ring into its designated groove, ensuring it is not twisted or pinched during assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force or sharp tools during installation, leading to O-ring damage. | Employ gentle stretching and a compatible lubricant. Ensure mating surfaces are smooth and free of burrs. |
| Installing the O-ring in a twisted or pinched position within the groove. | Verify the O-ring is seated evenly and uniformly around the entire circumference of the groove before final assembly. |
A: This Industrial O-Ring, Viton is manufactured from 304 Stainless Steel.
A: Chemical processing equipment, High-temperature fluid systems, Automotive fuel and oil systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||