This industrial O-ring features a Viton elastomer seal within a robust carbon steel housing. Engineered for extreme environments, it provides exceptional resistance to chemicals, high temperatures, and pressure, ensuring reliable sealing performance.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 2.595" |
| Outside Diameter | 3.429" |
| Cross Section | 0.161" |
A high-performance industrial component, this Viton O-ring is precisely manufactured with an Inside Diameter of 2.595 inches, an Outside Diameter of 3.429 inches, and a Cross Section of 0.161 inches. The Viton material offers exceptional resistance to a wide range of aggressive chemicals, oils, fuels, and solvents, along with excellent thermal stability across a broad operating temperature range. The carbon steel housing provides structural integrity and enhanced pressure handling capabilities, making this O-ring ideal for static and dynamic sealing applications in harsh industrial settings where conventional elastomers would degrade rapidly.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, dry, and free from any debris or damage. 2. Carefully lubricate the O-ring and the groove with a compatible lubricant (e.g., silicone grease). 3. Gently install the O-ring into the groove, avoiding any stretching or twisting, to ensure a proper seated position.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Installing a dry O-ring, leading to tearing or premature wear. | Always lubricate the O-ring and groove with a compatible lubricant before installation. |
| Stretching or twisting the O-ring during installation, causing deformation and leaks. | Install the O-ring carefully without overstretching or twisting it, ensuring it sits flush in the groove. |
| Using incompatible lubricants that degrade the Viton material. | Consult the O-ring manufacturer's compatibility chart for appropriate lubricants. |
A: This Industrial O-Ring, Viton is manufactured from Carbon Steel.
A: Chemical processing equipment, Automotive fuel systems, Aerospace hydraulic systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||