This industrial Viton O-ring is engineered for extreme environments. Its exceptional chemical inertness and high-temperature resilience ensure reliable sealing in critical fluid and gas systems. Built to precise specifications for optimal performance.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 5.466" |
| Outside Diameter | 5.966" |
| Cross Section | 0.218" |
A high-performance industrial component, this Viton O-ring is specifically designed for demanding sealing duties. It features an inside diameter of 5.466 inches, an outside diameter of 5.966 inches, and a cross-section of 0.218 inches. Manufactured from Viton, a fluoroelastomer renowned for its outstanding resistance to a broad spectrum of chemicals, fuels, oils, and solvents, as well as its excellent thermal stability across a wide temperature range. This makes it ideal for applications where standard elastomers would degrade. The material's inherent low compression set ensures long-term sealing integrity under pressure and elevated temperatures, minimizing the need for frequent maintenance or replacement in critical systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean both the groove and the O-ring to remove any debris or contaminants. 2. Lightly lubricate the O-ring and the groove with a compatible lubricant. 3. Carefully install the O-ring into the groove, ensuring it is seated evenly and without twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply gentle, even pressure and utilize appropriate tools to avoid pinching or stretching the O-ring. |
| Incorrect lubricant selection, causing material degradation. | Always use a lubricant that is chemically compatible with Viton and the media being sealed. |
| Failure to inspect the groove for nicks or burrs before installation. | Inspect the groove meticulously and address any imperfections that could compromise the seal. |
A: This Industrial O-Ring, Viton is manufactured from Nylon.
A: Chemical Processing Equipment, Aerospace Fuel Systems, Automotive Engine Seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||