This industrial Viton O-ring offers exceptional chemical resistance and thermal stability. Engineered for critical sealing applications, its precise dimensions ensure reliable performance under extreme conditions.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 5.301" |
| Outside Diameter | 8.394" |
| Cross Section | 0.206" |
Manufactured under strict quality controls, this industrial O-ring features an Inside Diameter (ID) of 5.301 inches, an Outside Diameter (OD) of 8.394 inches, and a Cross Section (CS) of 0.206 inches. Constructed from high-grade Viton (FKM), it provides superior resistance to a wide range of aggressive chemicals, fuels, oils, and high temperatures up to 400°F (204°C). This makes it ideal for applications in automotive, aerospace, chemical processing, and hydraulic systems where robust sealing integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, free of debris, and properly lubricated. 2. Carefully stretch the O-ring over the component, avoiding excessive force or sharp tools. 3. Gently seat the O-ring into the groove, ensuring it is fully contained and not twisted.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening during installation, leading to compression set and premature failure. | Apply only the necessary force to seat the O-ring within its groove, allowing for proper expansion and contraction. |
| Using incompatible lubricants or sealants that degrade the Viton material. | Consult the material compatibility chart and use only approved, Viton-compatible lubricants or sealants. |
A: This Industrial O-Ring, Viton is manufactured from Nylon.
A: High-temperature hydraulic systems, Chemical processing equipment, Automotive fuel and oil seals, Aerospace fluid connectors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||