This industrial Viton O-ring, with a robust brass core, provides exceptional sealing performance in harsh environments. Engineered for superior chemical and temperature resistance, it ensures reliable containment in critical industrial systems.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 8.422" |
| Outside Diameter | 10.940" |
| Cross Section | 0.237" |
Specified by design engineers worldwide, this Viton O-ring is constructed with a high-performance fluoroelastomer (FKM) sealing element bonded to a solid brass substrate. The precise dimensions of 8.422" inside diameter, 10.940" outside diameter, and a 0.237" cross-section ensure a precise fit and effective seal. Viton's inherent resistance to a broad spectrum of chemicals, fuels, oils, and extreme temperatures (up to 400°F/204°C) makes this O-ring ideal for hydraulic systems, fuel lines, and chemical processing equipment where standard elastomers would degrade.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove and mating surfaces are clean and free of debris. 2. Carefully inspect the O-ring for any nicks, cuts, or imperfections. 3. Lubricate the O-ring with a compatible lubricant to ease installation and prevent damage during assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the assembly, which can deform the O-ring and compromise the seal. | Follow specified torque values for the assembly. Do not exceed manufacturer recommendations. |
| Using incompatible lubricants that can degrade the Viton material. | Consult a chemical compatibility chart for lubricants suitable for Viton and the specific application fluids. |
A: This Industrial O-Ring, Viton is manufactured from Brass.
A: Chemical Processing Equipment, Automotive Fuel Systems, Hydraulic and Pneumatic Actuators.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||