This industrial O-ring, constructed from robust Viton material and a Nylon-reinforced core, is engineered for critical sealing applications. It offers exceptional resistance to chemicals and high temperatures, ensuring reliable performance in harsh environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 3.183" |
| Outside Diameter | 1.663" |
| Cross Section | 0.137" |
Built to exacting engineering tolerances, this Viton industrial O-ring boasts an Inside Diameter of 3.183 inches, an Outside Diameter of 1.663 inches, and a Cross Section of 0.137 inches. The combination of a premium Viton elastomer and a durable Nylon reinforcement provides superior mechanical strength and chemical inertness. This construction ensures excellent sealing capabilities against aggressive media, extreme temperatures, and high pressures, making it ideal for demanding industrial fluid power, automotive, and chemical processing systems where material integrity and long-term reliability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating grooves are clean, free of debris, and properly lubricated with a compatible lubricant. 2. Carefully stretch the O-ring over the smaller diameter of the component it will seal against, or gently compress it into its groove. 3. Verify the O-ring is seated correctly and uniformly within the groove, ensuring no twists or pinching.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation, leading to premature wear and reduced sealing effectiveness. | Stretch the O-ring only as much as necessary to clear the component or install into the groove. Use appropriate tools if necessary to avoid excessive deformation. |
| Using incompatible lubricants or cleaning agents that can degrade the Viton material. | Always consult the material compatibility charts and use only lubricants and cleaning agents specifically recommended for Viton elastomers. |
A: This Industrial O-Ring, Viton is manufactured from Nylon.
A: Chemical Processing Equipment, Hydraulic and Pneumatic Systems, Automotive Fuel Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||