This industrial Viton O-ring, integrated with a brass fitting, offers exceptional chemical and temperature resistance. Its robust construction ensures a reliable seal in demanding applications.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 5.795" |
| Outside Diameter | 4.617" |
| Cross Section | 0.220" |
Engineered for reliability and performance, this industrial O-ring features a precise Inside Diameter of 5.795 inches, an Outside Diameter of 4.617 inches, and a Cross Section of 0.220 inches. The Viton (FKM) material provides superior resistance to a wide range of aggressive chemicals, oils, fuels, and high temperatures up to 400°F (204°C), making it suitable for hydraulic systems, automotive applications, and chemical processing where extreme conditions are prevalent. The brass fitting ensures secure and stable integration within the assembly.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect the mating grooves and surfaces for cleanliness and absence of debris. 2. Carefully lubricate the O-ring with a compatible lubricant to facilitate installation and prevent tearing. 3. Gently install the O-ring into its designated groove, ensuring it is seated evenly and without twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening or excessive force during installation, leading to O-ring damage. | Apply consistent, moderate pressure during installation, and utilize appropriate lubrication. |
| Using incompatible lubricants or cleaning agents that degrade Viton material. | Consult the Viton material compatibility chart and use only approved lubricants and cleaning agents. |
A: This Industrial O-Ring, Viton is manufactured from Brass.
A: High-temperature hydraulic systems, Chemical processing equipment, Automotive fuel and oil systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||