Engineered for superior sealing performance, this Viton O-ring offers exceptional resistance to harsh chemicals, high temperatures, and extreme pressures. Its precise dimensions ensure a reliable fit in critical industrial systems.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 5.890" |
| Outside Diameter | 2.153" |
| Cross Section | 0.089" |
Trusted by engineers across multiple sectors, this industrial Viton O-ring boasts a precise Inside Diameter of 5.890 inches and an Outside Diameter of 2.153 inches, with a 0.089-inch cross-section. Viton (Fluoroelastomer) provides exceptional resistance to a broad range of chemicals, including fuels, oils, acids, and solvents, as well as excellent thermal stability across a wide temperature range. Its low compression set ensures long-term sealing integrity in demanding environments, making it ideal for hydraulic systems, automotive applications, and chemical processing equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean and free of debris or damage. 2. Carefully stretch the O-ring over the component, avoiding excessive force or sharp tools. 3. Position the O-ring squarely within the groove, ensuring it is not twisted or pinched.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to nicks or tears in the O-ring. | Apply a compatible lubricant to the O-ring and groove to facilitate smooth installation. Use plastic or wooden tools if necessary. |
| Installing a twisted or pinched O-ring, compromising the seal. | Visually inspect the O-ring for any twists or pinching before assembly. Ensure it sits flat and evenly within the groove. |
A: This Industrial O-Ring, Viton is manufactured from Polycarbonate.
A: Hydraulic Systems, Automotive Fuel Systems, Chemical Processing Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||