Engineered for critical sealing in harsh environments, this Viton O-ring offers exceptional resistance to chemicals, fuels, and extreme temperatures. Constructed with a durable Aluminum 6061 core for enhanced structural integrity.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 4.076" |
| Outside Diameter | 8.180" |
| Cross Section | 0.229" |
Trusted by engineers across multiple sectors, this industrial O-ring features a precise Inside Diameter of 4.076", an Outside Diameter of 8.180", and a Cross Section of 0.229". The Viton material provides outstanding resistance to aggressive chemicals, fuels, oils, and temperatures ranging from -20°F to +400°F (-29°C to +204°C). The Aluminum 6061 core enhances rigidity and ensures consistent sealing under pressure, making it ideal for aerospace, automotive, and chemical processing industries.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, dry, and free of burrs or sharp edges. 2. Carefully install the O-ring into the groove, avoiding stretching beyond its elastic limit. 3. Verify proper seating and compression to achieve a leak-free seal before applying operational pressure.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Stretching the O-ring excessively during installation. | Gently roll or slide the O-ring into the groove, minimizing any elongation to prevent premature failure and reduced service life. |
| Installing into a contaminated or damaged groove. | Thoroughly inspect and clean the groove to remove debris, nicks, or sharp edges that can compromise the seal's integrity and the O-ring's surface. |
A: This Industrial O-Ring, Viton is manufactured from Aluminum 6061.
A: Aerospace Fluid Connectors, Automotive Fuel Systems, Chemical Processing Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||