This high-performance industrial O-ring features a robust Viton elastomer for exceptional chemical and temperature resistance, housed within a durable brass fitting. Engineered for reliable sealing in critical industrial operations.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 0.956" |
| Outside Diameter | 8.564" |
| Cross Section | 0.181" |
Purpose-built for heavy-duty applications, this industrial O-ring boasts a precision-machined brass housing for superior structural integrity and corrosion resistance. The core Viton (FKM) elastomer provides excellent resistance to a wide range of aggressive chemicals, fuels, oils, and extreme temperatures (-20°F to +400°F). With an inside diameter of 0.956 inches, an outside diameter of 8.564 inches, and a cross-section of 0.181 inches, it ensures a tight, leak-proof seal in demanding hydraulic, pneumatic, and automotive systems. Its design minimizes compression set, guaranteeing long-term sealing performance under sustained pressure and thermal cycling.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean both mating surfaces and the O-ring thoroughly to remove any debris or contaminants. 2. Carefully inspect the O-ring for any nicks, cuts, or imperfections. 3. Apply a thin layer of compatible lubricant to the O-ring and the groove to facilitate installation and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring extrusion or tearing. | Gently guide the O-ring into its groove, ensuring it seats properly without being pinched or stretched. |
| Installing on dirty or damaged mating surfaces, compromising the seal integrity. | Always ensure mating surfaces are clean, smooth, and free from scratches or burrs before installation. |
A: This Industrial O-Ring, Viton is manufactured from Brass.
A: Hydraulic Systems, Pneumatic Actuators, Automotive Fuel Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||