Engineered for demanding environments, this Viton O-Ring features a robust 316 stainless steel housing, ensuring exceptional chemical resistance and mechanical integrity for superior sealing performance.
| Standard | ASME B18 |
| Material | 316 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 4.076" |
| Outside Diameter | 7.866" |
| Cross Section | 0.148" |
A high-performance industrial component, this Viton O-Ring is specifically designed for critical sealing applications requiring superior resistance to aggressive chemicals, high temperatures, and extreme pressures. The internal Viton elastomer provides excellent resilience and sealing capability, while the 316 stainless steel housing offers superior corrosion resistance and structural support. With an inside diameter of 4.076 inches, an outside diameter of 7.866 inches, and a cross-section of 0.148 inches, this component meets stringent industrial standards for reliability and longevity in sectors such as chemical processing, oil and gas, and aerospace.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean, dry, and free from debris or damage. 2. Carefully position the O-ring onto the designated groove or shaft. 3. Gently compress the O-ring into its seated position, avoiding any stretching or twisting. 4. Verify proper seating and alignment before assembling mating components.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners during assembly, leading to O-ring extrusion or compression set. | Adhere to specified torque values for all fasteners. Use a torque wrench for accurate tightening. |
| Using incompatible cleaning agents or lubricants that degrade the Viton material. | Consult the material compatibility chart for Viton and use only approved cleaning agents and lubricants. |
| Dragging the O-ring across sharp edges during installation, causing nicks or tears. | Utilize appropriate installation tools and ensure all edges are chamfered or deburred to prevent damage. |
A: This Industrial O-Ring, Viton is manufactured from 316 Stainless Steel.
A: Chemical Processing Equipment, Oil and Gas Exploration, Aerospace and Automotive Seals, High-Temperature Fluid Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||