This industrial O-ring, crafted from high-performance Viton and housed within a robust 316 stainless steel casing, ensures exceptional sealing integrity in demanding industrial settings.
| Standard | ASTM A106 |
| Material | 316 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 3.433" |
| Outside Diameter | 8.463" |
| Cross Section | 0.182" |
Purpose-built for heavy-duty applications, this Viton O-ring, featuring a 3.433-inch inside diameter, 8.463-inch outside diameter, and a 0.182-inch cross-section, offers superior resistance to aggressive chemicals, high temperatures (up to 400°F), and extreme pressure. The 316 stainless steel housing provides exceptional corrosion resistance and mechanical strength, making it ideal for hydraulic systems, chemical processing equipment, and oil & gas applications where seal failure is not an option.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean, dry, and free of burrs. 2. Lubricate the O-ring sparingly with a compatible lubricant if recommended for the application. 3. Carefully install the O-ring into the groove, avoiding stretching or twisting, and ensure it is seated evenly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Installing the O-ring dry in high-pressure applications. | Always use a compatible lubricant to reduce friction and prevent damage during installation and operation, especially in systems with significant pressure differentials. |
| Using excessive force during installation, causing the O-ring to roll or twist. | Apply gentle, even pressure and ensure the O-ring is properly seated within the groove without deformation. Rolling indicates improper fit or installation technique. |
A: This Industrial O-Ring, Viton is manufactured from 316 Stainless Steel.
A: Hydraulic Systems, Chemical Processing, Oil & Gas Exploration, Automotive Powertrains.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||