This industrial O-ring features a robust Viton sealing element encapsulated within a durable 304 Stainless Steel housing. Engineered for extreme environments, it provides exceptional chemical resistance and reliable sealing under pressure.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 8.406" |
| Outside Diameter | 9.319" |
| Cross Section | 0.128" |
Manufactured under strict quality controls, this industrial O-ring boasts an 8.406-inch inside diameter, a 9.319-inch outside diameter, and a 0.128-inch cross-section. The Viton elastomer offers superior resistance to aggressive chemicals, high temperatures, and extreme pressures, making it ideal for critical sealing applications. The 304 Stainless Steel housing enhances structural integrity, provides corrosion resistance, and ensures compatibility with a wide range of media, extending the service life of the seal in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean and free of debris. 2. Carefully position the O-ring within the groove, avoiding excessive stretching. 3. Apply a thin layer of compatible lubricant to the O-ring and groove if necessary for assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to nicks or cuts on the O-ring. | Handle the O-ring with care and use appropriate tools to avoid damaging the sealing surface. |
| Incorrectly sizing the O-ring for the application, resulting in leaks or premature failure. | Verify the O-ring dimensions (ID, OD, CS) match the groove specifications precisely. |
A: This Industrial O-Ring, Viton is manufactured from 304 Stainless Steel.
A: Chemical Processing Equipment, High-Temperature Hydraulic Systems, Petroleum and Gas Industry Seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||