This industrial Viton O-ring, encased in robust 304 stainless steel, offers superior sealing in demanding applications. Its exceptional chemical and thermal resistance ensures long-term reliability.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 6.868" |
| Outside Diameter | 2.966" |
| Cross Section | 0.085" |
Specified by design engineers worldwide, this industrial O-ring features an inside diameter of 6.868 inches, an outside diameter of 2.966 inches, and a precise cross-section of 0.085 inches. The Viton elastomer provides excellent resistance to high temperatures, aggressive chemicals, fuels, and oils, while the 304 stainless steel housing enhances structural integrity and corrosion resistance. This combination makes it ideal for high-pressure systems and extreme environmental conditions where material degradation is a critical concern. Its high resilience and low compression set ensure a persistent seal over extended operational periods.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean and free of debris. 2. Carefully install the O-ring into the designated groove, avoiding any stretching or twisting. 3. Apply a compatible lubricant if recommended for the specific application to facilitate installation and prevent initial damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Stretching the O-ring during installation. | Gently roll or place the O-ring into the groove without excessive force or elongation. |
| Using incompatible lubricants or cleaning agents. | Always consult the material compatibility chart for Viton and 304 stainless steel to select appropriate lubricants and cleaning agents. |
| Improperly sized O-ring groove. | Verify that the O-ring groove dimensions meet the specified design requirements for this O-ring size to ensure proper compression and sealing. |
A: This Industrial O-Ring, Viton is manufactured from 304 Stainless Steel.
A: Automotive fuel systems, Chemical processing equipment, Aerospace fluid handling, High-temperature industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||