Engineered for demanding industrial environments, this Viton O-ring provides exceptional sealing performance under extreme temperatures and aggressive chemical exposure. Its robust construction ensures reliable, long-term service life.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 9.805" |
| Outside Diameter | 8.040" |
| Cross Section | 0.191" |
Specified by design engineers worldwide, this Viton O-ring (FKM) boasts an inside diameter of 9.805 inches, an outside diameter of 8.040 inches, and a cross-section of 0.191 inches. Its superior resistance to high temperatures (up to 400°F/204°C), fuels, oils, solvents, and many acids makes it the material of choice for critical sealing in aerospace, automotive, chemical processing, and oil & gas industries where standard elastomers fail. The inherent low compression set ensures consistent sealing force over extended operational periods.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, free of debris, and properly lubricated with a compatible lubricant. 2. Carefully position the O-ring within the groove, avoiding any stretching or twisting. 3. For larger O-rings, use appropriate tooling to prevent damage during installation and ensure a snug fit without over-compression.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Installing a dry O-ring, leading to tearing or stretching. | Always lubricate the O-ring and groove with a compatible lubricant before installation. |
| Using excessive force or sharp tools, causing nicks or cuts. | Employ appropriate O-ring installation tools and handle with care to prevent damage. |
| Selecting the wrong O-ring material for the application's chemical or temperature environment. | Consult chemical compatibility charts and temperature specifications to ensure the Viton material is suitable for the intended use. |
A: This Industrial O-Ring, Viton is manufactured from Polycarbonate.
A: Chemical Processing Equipment Seals, Automotive Fuel System Components, Aerospace Hydraulic and Fuel Seals, Oil and Gas Exploration Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||