This industrial O-ring features a premium Viton sealing element encapsulated within a robust 304 stainless steel housing. Engineered for superior chemical resistance and high-temperature performance in critical sealing applications.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 5.259" |
| Outside Diameter | 6.967" |
| Cross Section | 0.118" |
Built to exacting engineering tolerances, this industrial O-ring boasts an Inside Diameter of 5.259 inches, an Outside Diameter of 6.967 inches, and a Cross Section of 0.118 inches. The Viton compound offers exceptional resistance to a wide array of chemicals, fuels, oils, and high temperatures, while the 304 stainless steel housing provides structural integrity and corrosion resistance. This combination ensures reliable, long-lasting sealing in demanding environments such as automotive, aerospace, chemical processing, and oil & gas industries where extreme conditions are prevalent.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure sealing surfaces are clean, dry, and free from debris. 2. Carefully install the O-ring into its designated groove, avoiding twisting or stretching. 3. Apply a thin layer of compatible lubricant if necessary to facilitate installation and proper seating.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-stretching the O-ring during installation, leading to premature failure. | Install the O-ring without excessive tension, allowing it to conform naturally to the groove. |
| Using incompatible lubricants or cleaning agents that can degrade the Viton material. | Consult the material compatibility chart for the specific Viton compound and approved lubricants/cleaning agents. |
A: This Industrial O-Ring, Viton is manufactured from 304 Stainless Steel.
A: Chemical Processing Equipment, Automotive Fuel Systems, High-Temperature Industrial Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||