This industrial Viton O-ring, integrated with a brass fitting, provides exceptional sealing in demanding environments. Its superior chemical and temperature resistance ensures long-term reliability in critical fluid and gas transfer systems.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 8.362" |
| Outside Diameter | 8.490" |
| Cross Section | 0.255" |
Engineered for reliability and performance, this industrial O-ring boasts a precise inside diameter of 8.362 inches and an outside diameter of 8.490 inches, with a robust 0.255-inch cross-section. The Viton (FKM) elastomer offers outstanding resistance to high temperatures, aggressive chemicals, fuels, and oils, making it suitable for applications ranging from hydraulic systems and fuel lines to chemical processing equipment and automotive components where extreme conditions are present. The integrated brass fitting ensures secure and leak-proof integration into assembly.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, free of debris, and properly lubricated with a compatible lubricant. 2. Carefully position the O-ring onto the designated groove or shaft, ensuring it is seated evenly without twisting. 3. Apply controlled compression during assembly, avoiding over-tightening which can damage the O-ring or its housing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible lubricants that degrade Viton. | Consult the Viton chemical resistance chart to select a lubricant compatible with both Viton and the media being sealed. |
| Overtightening fasteners, leading to O-ring extrusion or compression set. | Adhere to specified torque values for all fasteners to prevent excessive stress on the O-ring and sealing assembly. |
| Installing a twisted or pinched O-ring. | Visually inspect the O-ring for any signs of twisting or pinching before and during installation, ensuring it lies flat in its groove. |
A: This Industrial O-Ring, Viton is manufactured from Brass.
A: High-temperature hydraulic systems, Chemical processing equipment, Fuel and oil handling systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||