This industrial O-ring features a robust Viton elastomer seal within a high-strength 316 stainless steel housing, offering superior chemical resistance and operational integrity in demanding applications.
| Standard | ASME B18 |
| Material | 316 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 0.496" |
| Outside Diameter | 7.849" |
| Cross Section | 0.131" |
Specified by design engineers worldwide, this Viton O-ring, with a 0.496" inside diameter, 7.849" outside diameter, and 0.131" cross-section, is constructed from premium Viton material known for its exceptional resistance to high temperatures, aggressive chemicals, oils, and fuels. The 316 stainless steel housing provides enhanced structural integrity and corrosion resistance, making it ideal for use in aerospace, automotive, chemical processing, and oil & gas industries where reliability under extreme conditions is paramount. Its precise dimensions ensure a secure and leak-proof seal.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure sealing surfaces are clean, dry, and free from debris or damage. 2. Carefully stretch the O-ring over the smaller diameter of the mating component, avoiding sharp edges or excessive force. 3. Position the O-ring within its designated groove, ensuring it is seated evenly and without twists.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Stretch the O-ring only enough to pass over the component, minimizing tension and potential for permanent deformation. |
| Installing on dirty or damaged sealing surfaces. | Thoroughly inspect and clean all mating surfaces before installation to prevent premature seal failure. |
A: This Industrial O-Ring, Viton is manufactured from 316 Stainless Steel.
A: High-temperature fluid power systems, Chemical processing equipment, Automotive fuel and oil systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||