Engineered for superior chemical and thermal resistance, this Viton O-ring with a 304 Stainless Steel casing provides exceptional sealing integrity in harsh industrial applications, ensuring reliability and longevity.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 9.384" |
| Outside Diameter | 2.899" |
| Cross Section | 0.140" |
Designed for demanding industrial environments, this O-ring features a robust 304 stainless steel housing for exceptional corrosion resistance and structural integrity. The high-performance Viton elastomer offers excellent resistance to a wide range of chemicals, oils, fuels, and extreme temperatures. With an inside diameter of 9.384", an outside diameter of 2.899", and a cross-section of 0.140", it is precisely manufactured to meet stringent sealing requirements in critical hydraulic, pneumatic, and fluid handling systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating grooves are clean, dry, and free of debris. Inspect for any damage or imperfections. 2. Carefully position the O-ring within its designated groove, avoiding stretching or twisting. 3. Apply a compatible lubricant if recommended for the specific application to facilitate installation and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage or permanent deformation. | Apply a suitable lubricant and gently guide the O-ring into its groove. If resistance is met, reassess the O-ring size and groove dimensions. |
| Installing on a contaminated or damaged mating surface, compromising the seal. | Thoroughly clean and inspect all sealing surfaces prior to installation. Any nicks, burrs, or corrosion must be addressed. |
A: This Industrial O-Ring, Viton is manufactured from 304 Stainless Steel.
A: Chemical Processing Equipment, Automotive Fuel Systems, Aerospace Hydraulic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||