This industrial-grade Viton O-ring delivers exceptional sealing performance in harsh conditions. Its robust construction and superior material properties ensure reliable operation and longevity in demanding applications.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 2.503" |
| Outside Diameter | 10.700" |
| Cross Section | 0.187" |
Designed for demanding industrial environments, this Viton O-ring (FKM) offers superior resistance to high temperatures, aggressive chemicals, fuels, and oils. With an inside diameter of 2.503 inches, an outside diameter of 10.700 inches, and a precise 0.187-inch cross-section, it provides a tight, leak-proof seal in critical hydraulic, pneumatic, and fluid power systems. The inherent thermal stability and chemical inertness of Viton make it ideal for applications involving extreme temperatures ranging from -15°F to +400°F (-26°C to +204°C).
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect the O-ring and mating groove for any damage, debris, or contamination. 2. Lightly lubricate the O-ring and the groove with a compatible lubricant recommended for the application and O-ring material. 3. Carefully install the O-ring into the groove, ensuring it is seated properly and not twisted.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong lubricant, which can degrade the Viton material. | Always use a lubricant specifically rated as compatible with Viton (FKM) elastomers and the operating fluid. |
| Twisting or overstretching the O-ring during installation, leading to premature failure. | Handle the O-ring with care and ensure it is installed straight into the groove, avoiding excessive stretching or deformation. |
| Installing on a contaminated or damaged groove. | Thoroughly clean and inspect the groove for any nicks, burrs, or debris before O-ring installation. |
A: This Industrial O-Ring, Viton is manufactured from Polycarbonate.
A: Automotive Fuel Systems, Aerospace Hydraulic Systems, Chemical Processing Equipment, High-Temperature Sealing Applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||