Engineered for superior sealing in extreme environments, this Viton O-ring, housed within a 304 stainless steel retainer, offers exceptional chemical resistance and durability for critical industrial applications.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 2.713" |
| Outside Diameter | 2.768" |
| Cross Section | 0.073" |
Purpose-built for heavy-duty applications, this industrial O-ring features a precise 2.713" inside diameter, 2.768" outside diameter, and a 0.073" cross-section, ensuring a tight seal in demanding operational conditions. The Viton elastomer provides excellent resistance to a broad spectrum of chemicals, oils, and high temperatures, while the 304 stainless steel housing offers robust structural integrity and corrosion resistance. This combination makes it ideal for hydraulic systems, chemical processing equipment, and other high-pressure, aggressive fluid environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure sealing surfaces are clean and free of debris. 2. Carefully compress the O-ring into its groove, avoiding any twisting or stretching. 3. Verify proper seating and uniform compression before applying pressure.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Gently guide the O-ring into its groove, using a non-marring tool if necessary, to maintain its original dimensions. |
| Installing on contaminated surfaces. | Thoroughly clean both the O-ring and the groove to prevent leaks and premature wear. |
A: This Industrial O-Ring, Viton is manufactured from 304 Stainless Steel.
A: Hydraulic Systems, Chemical Processing, Automotive Sealing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||