Engineered for exceptional chemical and thermal resistance, this Viton O-ring, housed within a 304 stainless steel casing, provides reliable sealing solutions for critical industrial fluid and gas systems.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 3.667" |
| Outside Diameter | 4.351" |
| Cross Section | 0.072" |
Designed for demanding industrial environments, this O-ring boasts a precise Inside Diameter of 3.667 inches, an Outside Diameter of 4.351 inches, and a 0.072-inch cross-section. The high-performance Viton elastomer offers outstanding resistance to a wide range of aggressive chemicals, fuels, oils, and extreme temperatures (-20°F to 400°F), ensuring longevity and leak-free operation in challenging sectors like chemical processing, automotive, aerospace, and oil & gas.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean, dry, and free from any debris or burrs. 2. Carefully lubricate the O-ring with a compatible lubricant to prevent damage during installation. 3. Gently install the O-ring into the groove or gland, ensuring it is seated evenly and without twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong lubricant, leading to elastomer degradation. | Always consult the O-ring material compatibility chart and use a lubricant specifically recommended for Viton. |
| Over-stretching or twisting the O-ring during installation, causing premature failure. | Handle the O-ring with care, avoid excessive stretching, and ensure it is properly seated in the groove without any twists. |
A: This Industrial O-Ring, Viton is manufactured from 304 Stainless Steel.
A: Chemical Processing Equipment, Automotive Fuel Systems, Aerospace Hydraulic Systems, Oil and Gas Exploration.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||